Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How and When to Replace the Timing Belt of the Audi A3 2.0 TDI

Model: Audi A3 8V, MK 3 - Years 2012-2019
Part: Timing belt

Below are the instructions on how and when to replace the timing belt on the Audi A3 2.0 TDI (and other models with the same engine); the manufacturer recommends replacing the belt around 130,000 miles or every 10 years. Therefore, raise the vehicle and remove the front right wheel; take off the wheel arch liner and then the auxiliary belt, followed by removing the crankshaft pulley. At this point, remove the timing cover and the metal shield, accessing the timing belt; take the necessary references for replacing the belt, following the video tutorial to the end!

Updated on 27 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Timing Belt on the Audi A3 1.6 TDI
Guide to Replacing the Timing Belt on the Audi A3 1.6 TDI
Audi A3 (2012-2019 / 8V, MK 3) Today's main instructions will show you how to remove and replace the timing belt and water pump on the Audi A3 1.6 TDI, as well as the Volkswagen Go…
When Should I Change the Timing Belt on My Audi A3 with a 1.6 TDI Engine? And How Can I Do It Myself?
When Should I Change the Timing Belt on My Audi A3 with a 1.6 TDI Engine? And How Can I Do It Myself?
Audi A3 (2003-2013 / MK 2, 8P) For your Audi A3 with a 1.6 TDI engine, it is recommended to replace the timing belt after 93,000 miles or after 6 years of use. Do not exceed these …
How to replace the timing belt on the Audi A3 2.0 TDi?
How to replace the timing belt on the Audi A3 2.0 TDi?
Audi A3 (2003-2013 / MK 2, 8P) To replace the timing belt on the Audi A3 2.0 TDi, open the bonnet to access the components inside the engine bay. This will allow you to remove obst…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos