Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Water Pump on Audi Q3 2.0 TFSI

Model: Audi Q3 8U - Years 2011-2018
Part: Pump

In this guide, we will cover the main instructions on how to remove and replace the water pump on the Audi Q3 2.0 TFSI. First, open the hood of the vehicle and begin by removing the engine oil filter; then, it will be necessary to remove the air intake manifold by unscrewing all the securing bolts and disconnecting the various hoses and connectors, as shown in the video. At this point, proceed with the removal of the water pump by disconnecting the hoses to drain the fluid into a container; unscrew the pump bolts and replace it with the new original one.

Posted on 6 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Repair the High-Pressure Pump on an Audi Q3
How to Repair the High-Pressure Pump on an Audi Q3
Audi Q3 (2011-2018 / 8U) In this video tutorial, you can see how to repair the high-pressure pump on an Audi Q3. The first thing to do is lift the hood and secure it with the…
Where Are the Fuses Located in the Audi Q3?
Where Are the Fuses Located in the Audi Q3?
Audi Q3 (2018-2025 / F3) The fuse boxes in the Audi Q3 serve to hold the fuses that manage the operation of the devices installed in the car: this type of vehicle will have t…
Disassembly of the rear light of the Audi Q3
Disassembly of the rear light of the Audi Q3
Audi Q3 (2011-2018 / 8U) In this guide, we will see how to disassemble and replace the rear taillight of the Audi Q3. First, open the rear hatch of the trunk and start removi…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos