Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil and oil filter of the Audi Q3 2.0 TDI

Model: Audi Q3 8U - Years 2011-2018
Part: Oil filter

Today we will see the instructions on how to replace the engine oil and oil filter, performing the routine maintenance of the Audi Q3 2.0 TDI. First, lift the vehicle and start loosening the oil drain plug found on the oil pan, letting it drain into a container for about ten minutes; then unscrew the oil filter cartridge, unscrewing the screw of the bracket of the pipes found above the filter, as shown in the video. Once the oil filter is replaced, you can top up with the new engine oil!

Posted on 21 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on an Audi Q3 2.0 TDI
How to Replace the Air Filter on an Audi Q3 2.0 TDI
Audi Q3 (2011-2018 / 8U) In today's tutorial, you will learn how to remove and replace the engine air filter on an Audi Q3 2.0 TDI, following the instructions below. First, o…
How to replace the air filter of the Audi Q3 2.0 TDI
How to replace the air filter of the Audi Q3 2.0 TDI
Audi Q3 (2011-2018 / 8U) In today's video we will see the instructions that will allow us to disassemble and replace the air filter of the Audi Q3 2.0 TDI engine. First, we o…
How to Top Off Engine Oil in an Audi Q3?
How to Top Off Engine Oil in an Audi Q3?
Audi Q3 (2018-2025 / F3) According to the manufacturer, oil consumption depends on driving style and operating conditions. The owner's manual states a "normal" oil consumptio…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos