Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter of the Audi Q3 2.0 TDI

Model: Audi Q3 8U - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Air filter

See other generations:
Video tutorial

In today's video we will see the instructions that will allow us to disassemble and replace the air filter of the Audi Q3 2.0 TDI engine. First, we open the hood of the car and start unscrewing the fixing screws that we find on the side of the filter box cover; we pay attention to the intake hose, which we will have to slightly lift to remove the air filter cartridge, as shown in the video.

At this point we install the new engine air filter, inserting it in the correct direction; finally, we reassemble the cover, fixing all the screws!


Posted on 6 March 2025 by ScegliAuto


Related tutorials

How to Replace the Air Filter on an Audi Q3 2.0 TDI
How to Replace the Air Filter on an Audi Q3 2.0 TDI
Audi Q3 (2011-2018 / 8U) In today's tutorial, you will learn how to remove and replace the engine air filter on an Audi Q3 2.0 TDI, following the instructions below. First, o…
Replacement of the engine air filter for the Audi Q3 2.0 TDI.
Replacement of the engine air filter for the Audi Q3 2.0 TDI.
Audi Q3 (2011-2018 / 8U) Today's instructions will show us the process of disassembling and replacing the engine air filter of the Audi Q3 2.0 TDI. First, we open the hood of…
How to Replace the Cabin Air Filter in a 2018 Audi Q3
How to Replace the Cabin Air Filter in a 2018 Audi Q3
Audi Q3 (2011-2018 / 8U) To properly replace the cabin air filter in your 2018 Audi Q3, carefully read the following procedure and then apply the various steps described. Fir…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos