Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter in a 2018 Audi Q3

Model: Audi Q3 8U - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Cabin air filter

See other generations:
Video tutorial

To properly replace the cabin air filter in your 2018 Audi Q3, carefully read the following procedure and then apply the various steps described. First, get in the vehicle and go to the passenger side.

Locate the panel at the bottom of the glove compartment and remove it after taking out the safety plugs. Once the protective panel is removed, find the box that contains the air filter and proceed with its replacement.


Updated on 1 November 2026 by ScegliAuto


Related tutorials

How to replace the air filter of the Audi Q3 2.0 TDI
How to replace the air filter of the Audi Q3 2.0 TDI
Audi Q3 (2011-2018 / 8U) In today's video we will see the instructions that will allow us to disassemble and replace the air filter of the Audi Q3 2.0 TDI engine. First, we o…
How to Replace the Air Filter on an Audi Q3 2.0 TDI
How to Replace the Air Filter on an Audi Q3 2.0 TDI
Audi Q3 (2011-2018 / 8U) In today's tutorial, you will learn how to remove and replace the engine air filter on an Audi Q3 2.0 TDI, following the instructions below. First, o…
How to Replace the Engine Air Filter in an Audi Q3
How to Replace the Engine Air Filter in an Audi Q3
Audi Q3 (2011-2018 / 8U) To replace the engine air filter in an Audi Q3, open the hood and locate the air filter box, situated at the top of the engine compartment and connec…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos