Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Tail Light and Third Brake Light of the Audi A4 Avant

Model: Audi A4 B8 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part:

See other generations:
Video tutorial

Today, you will learn the instructions to remove and replace the tail light and third brake light of the Audi A4 Avant. First, open the trunk lid and start by removing the plastic cover behind the third brake light.

Then, disconnect the electrical connector of the light and release the internal metal clips to extract the light from the outside, as shown in the video. At this point, replace the LED bulbs or the entire third brake light.

Secure it properly to the trunk lid and check its proper operation!


Posted on 7 October 2026 by ScegliAuto


Related tutorials

Audi A4 (2004-2008 / B7) Is the tail light on your A4 out? Here's how to replace the bulbs. Lift the trunk and secure it. Remove the fabric cover that hides the access to the…
Audi A4 (2004-2008 / B7) If the AdBlue warning light is on in your Audi A4 Avant, it means that the emissions fluid is at a too low level and needs to be refilled. To do this…
Audi A4 (2007-2016 / B8) In this tutorial, you will see how to remove the tail lights on an Audi A4, a very simple and quick operation. First, ensure the key is not in the ig…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Adjust the Rear Seats of the BMW X1

In this video, see how the BMW X1's cargo area can be used to transport large loads. To expand this area, the rear seat can be folded down with a 40/20/40 split, each section can be folded separately or all together. The seats can be adjusted independently to provide more space for passengers or cargo: to do this, pull the handle located at the bottom and push or pull as needed. To position the backrest in the desired position, there is a cordura handle on the left side. Inside the trunk, there are buttons that automatically fold the backrests of the rear seats forward, but only after ensuring they are clear. They can be returned to an upright position manually using the cordura handle.

Watch the video!


by ScegliAuto

More videos