Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the third brake light of the Audi A4

Model: Audi A4 B9 - Years 2014-2024
Part: Tail light

Today's instructions will allow us to disassemble and replace the tail light or third brake light of the Audi A4, in simple and quick steps. First, we access the rear of the vehicle and begin to lever the third brake light to detach and remove it; then disconnect the electrical connector of the lights, as shown in the video. At this point, we proceed to replace if necessary only the bulbs or directly the entire third brake light; we connect it and check its operation before fixing it back on the rear hatch.

Posted on 30 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the third brake light on the Audi A4
How to replace the third brake light on the Audi A4
Audi A4 (2000-2004 / B6) Today's steps will show us how to disassemble and replace the third brake light on the Audi A4. First, we open the rear trunk door and start removing…
How to disassemble the third brake light in an Audi A4?
How to disassemble the third brake light in an Audi A4?
Audi A4 (2000-2004 / B6) In this tutorial we can see how to remove the third brake light in the Audi A4, an extremely simple and quick operation. First of all, make sure that…
Removing the Third Brake Light of an Audi A4
Removing the Third Brake Light of an Audi A4
Audi A4 (2007-2016 / B8) In this brief guide, we will see the instructions that will allow you to remove and replace the third brake light of an Audi A4. First, open the rear…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos