Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear lights on the Audi A4?

Model: Audi A4 B8 - Years 2007-2016
Part: Tail light

In this tutorial we can see how to replace the rear lights in the Audi A4, an extremely simple and quick operation. First of all, make sure that the key is not inserted, so that you can work safely, then open the trunk door and release the carpet placed on the back of the headlight in question. Next, locate the plastic fastening bolt, unscrew it, grip the headlight and, pulling it outwards, separate it from the bodywork. At this point, all that remains is to disconnect the power connector and install the replacement following the reverse procedure.

Posted on 22 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Headlight of the Audi A4 B6
How to Remove the Rear Headlight of the Audi A4 B6
Audi A4 (2000-2004 / B6) In this guide, discover how to properly remove the rear headlight of your Audi A4 B6. First, turn off the car and park it on a flat surface to perfor…
How to disassemble the rear lights on the Audi A4?
How to disassemble the rear lights on the Audi A4?
Audi A4 (2007-2016 / B8) In this tutorial we can see how to disassemble the rear lights on the Audi A4, an extremely simple and quick operation. First of all, make sure that …
How to disassemble the rear lights in the Audi A4?
How to disassemble the rear lights in the Audi A4?
Audi A4 (2004-2008 / B7) In this tutorial, we can see how to replace the rear lights on the Audi A4, an extremely simple and quick operation. First of all, make sure that the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos