Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear lights on the Audi A4?

Model: Audi A4 B9 - Years 2014-2024
Part: Tail light

In this tutorial, we can see how to remove the rear lights on the Audi A4, an extremely simple and fast operation. First of all, make sure that the key is not inserted, so that you can work safely, then open the trunk door and, using a flat-tipped screwdriver, unclip the plastic cover on the inner edge of the light in question. Next, unscrew the two bolts with a Torx key that have just been released, grab the light and separate it from the bodywork. At this point, all that remains is to disconnect the power connector, replace the faulty element, and reassemble everything.

Posted on 31 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the rear lights on the Audi A4?
How to disassemble the rear lights on the Audi A4?
Audi A4 (2007-2016 / B8) .. In this tutorial we can see how to disassemble the rear lights on the Audi A4, an extremely simple and quick operation. First of.. …
How to Remove the Tail Lights on an Audi A4?
How to Remove the Tail Lights on an Audi A4?
Audi A4 (2007-2016 / B8) In this tutorial, you will see how to remove the tail lights on an Audi A4, a very simple and quick operation. First, ensure the key is not in the ig…
How to disassemble the rear lights in the Audi A4?
How to disassemble the rear lights in the Audi A4?
Audi A4 (2004-2008 / B7) In this tutorial, we can see how to replace the rear lights on the Audi A4, an extremely simple and quick operation. First of all, make sure that the…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos