Do it yourself
Frequently asked questions about cars and motorcycles

Replace the Brake Light on Audi A4

Model: Audi A4 B6 - Years: 2000, 2001, 2002, 2003, 2004
Part: Tail light

See other generations:
Video tutorial

Replacing the rear brake light on an Audi A4? It's a fairly simple task, let's see. Open the trunk hood, unscrew the fastening screws located at the side of the trunk lining using a screwdriver. Disconnect the rear light from its housing once all screws are removed (disconnect the power connectors) and replace the damaged bulbs with new ones (same size and voltage).

Reconnect the power connectors and secure the new light with the included screws. Test the proper operation of the previously installed bulbs.

Get in the vehicle and turn on the lights of the A4.


Updated on 22 March 2026 by ScegliAuto


Related tutorials

Audi A4 (2004-2008 / B7) In today's tutorial video, you will see a solution on how to reset the brake pad wear light on an Audi A4 B7. Before performing the operation, you mu…
Audi A4 (2007-2016 / B8) This guide outlines the main instructions on how to disassemble and replace the rear brake pedal switch on the Audi A4. First, open the driver's side…
Audi A4 (2007-2016 / B8) In this article, you will learn how to remove the third brake light on the Audi A4 B8. This procedure is useful in case of failures. To remove the br…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos