Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the third brake light of the Audi A4 B8

Model: Audi A4 B8 - Years 2007-2016
Part: Checks and maintenance

In this article we will see how to disassemble the third brake light of the Audi A4 B8, this procedure is useful in case of malfunctions. To disassemble the brake light, simply pull the light panel outwards, to extract it you can use the appropriate tool as shown in the video or with a flathead screwdriver. Once removed, the connectors must be disconnected. At this point, you can replace it with a new brake light, connecting the connectors and then pushing the light into the appropriate housing, or you can replace the bulb in case of malfunction.

Posted on 9 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Brake Light on an Audi A4 B7
How to Remove the Brake Light on an Audi A4 B7
Audi A4 (2004-2008 / B7) To access the third brake light on the Audi A4 (B7), open the trunk. From the top of the open trunk, you can reach the access panel for the third bra…
How to disassemble the third brake light of the Audi A4
How to disassemble the third brake light of the Audi A4
Audi A4 (2014-2024 / B9) Today's instructions will allow us to disassemble and replace the tail light or third brake light of the Audi A4, in simple and quick steps. First, w…
Removing the Third Brake Light of an Audi A4
Removing the Third Brake Light of an Audi A4
Audi A4 (2007-2016 / B8) In this brief guide, we will see the instructions that will allow you to remove and replace the third brake light of an Audi A4. First, open the rear…

    Frequently Asked Questions

    • A4 2007-2016 - How does the navigation system of my Audi A4 work? Read answer
    • A4 2004-2008 - Where is the AUX cable socket on the Audi A4? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos