Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Brake Light on an Audi A4 B7

Model: Audi A4 B7 - Years: 2004, 2005, 2006, 2007, 2008
Part:

See other generations:
Video tutorial

To access the third brake light on the Audi A4 (B7), open the trunk. From the top of the open trunk, you can reach the access panel for the third brake light.

From there, you can access the electrical connector, which you need to disconnect from its housing. Then, easily remove the clips holding the third brake light in place.

Once it is removed from its housing, you can easily inspect it and check for any burnt bulbs among the five positioned in the housing. If needed, replace them, remembering to avoid touching the new bulbs with your hands.

Then, reposition the light assembly, reconnect the electrical connector, and close the access panel. Operation complete.


Updated on 11 June 2026 by ScegliAuto


Related tutorials

Audi A4 (2004-2008 / B7) Follow this guide to remove and replace the clutch pedal sensor on the Audi A4 with these simple steps. First, open the front hood and start by remov…
Audi A4 (2004-2008 / B7) Before you can begin, open the hood of your Audi A4. Start by removing the screws that secure the front headlight to the vehicle using a Torx screwdr…
Audi A4 (2004-2008 / B7) Before starting, open the hood of your Audi A4. Begin by removing the screws that secure the front headlight to the vehicle using a Torx screwdriver.…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Where is the cooling fan fuse located on the VW Touran?

The fuse for the engine cooling fan on Volkswagen Touran vehicles is located inside the fuse box in the engine bay. The fuse box is specifically mounted near the battery, on the left side of the vehicle. To replace the fuse, open the bonnet and then the cover of the fuse box by releasing the clips. The cover has a diagram of the fuses contained within. The fuse in question is labelled F8 and is 10 Amperes. Remove the fuse and insert the new one, then close the fuse box cover and the bonnet.

Watch the video!


by ScegliAuto

More videos