Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the battery located in the BMW X1?

Model: BMW X1 F48 - Years 2015-2022
Part: Battery

Video tutorial
Detailed instructions - In this video, you can see where the battery is located in the BMW X1 F48 and how to proceed if you need to replace it. As shown, it is positioned inside the engine compartment, specifically under the protective panel on the driver's side. To access it, you must first remove the cover located in front of the windshield and then the panel with a red cap. Once you have done this, if you need to replace the battery, you will need to remove the air filter box and unscrew the bolt of the mounting bracket.

Updated on 11 August 2026 by ScegliAuto


Related tutorials

Where is the battery located in the BMW X1?
Where is the battery located in the BMW X1?
BMW X1 (2015-2022 / F48) In this video, you can see where the battery is located in the BMW X1 and how to proceed if you need to recharge it or perform a jump start. As shown…
Where is the USB port located in the BMW X1?
Where is the USB port located in the BMW X1?
BMW X1 (2015-2022 / F48) In this short video, you can see where the USB port is located in the BMW X1 F48, an essential element if you need to update the system, the maps, or…
Where is the battery located and how to remove it from a BMW X1?
Where is the battery located and how to remove it from a BMW X1?
BMW X1 (2009-2015 / E84) Good morning, today we will focus on identifying and reaching the battery of our BMW X1. To begin, let's carefully open the front engine hood. After …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Sportage?

To reset the tyre pressure warning light on a Kia Sportage, simply inflate the tyres to the recommended pressure: for this model, the recommended inflation pressure for each tyre is 2.4 bar and is indicated on the sticker affixed to the driver’s door pillar. Once the tyre pressures have been restored to the recommended value, turn on the ignition to check that the new pressures are registered by the sensors: after a few seconds, you will notice that the warning light will turn off.

Watch the video!


by ScegliAuto

More videos