Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure light on the Suzuki S-Cross?

Model: Suzuki S Cross MK 1 - Years 2013-2019
Part:

In order to reset the tire pressure warning light on the Suzuki S-Cross, you will need to turn on the instrument panel, access the menu, and check which tire has insufficient pressure. Once the tire has been identified, you can inflate it to the recommended pressure, which is written on a sticker attached to the driver's side door frame. After inflating the tire, you can turn on the instrument panel to check if the warning light has disappeared. If the light is still on, you will need to drive for a few kilometers to make it go away.

Posted on 15 October 2025 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Tyre Pressure Warning Light on the Suzuki S-Cross
Resetting the Tyre Pressure Warning Light on the Suzuki S-Cross
Suzuki S Cross (2013-2019 / MK 1) .. the tyre pressure warning light on the Suzuki S-Cross by following the instructions below. First, get in the vehicle and turn on the ignition by pressing.. …
How to Reset the Tyre Pressure Light on a Suzuki S-Cross?
How to Reset the Tyre Pressure Light on a Suzuki S-Cross?
Suzuki S Cross (2013-2019 / MK 1) .. To reset the tyre pressure light on the Suzuki S-Cross, turn on the ignition by inserting the key and turning it. Once the ignition is on, navigate the.. …
How to Reset the Tyre Warning Light on a Suzuki S-Cross
Suzuki S Cross (2021-2026 / MK 2) .. short video posted here, we can see the Suzuki S-Cross, the vehicle in question. It is equipped with electronic sensors to monitor tyre pressure; therefore,.. …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos