Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Air filter replacement for BMW X1

Model: BMW X1 F48 - Years 2015-2022
Part: Air filter

The following steps will show us how to disassemble and replace the engine air filter of the BMW X1. First, we open the hood of the car and start by disconnecting the intake hose, unscrewing the clamp screw; then we disconnect the electrical connector of the airflow sensor and unscrew the screws fixing the air filter box, as shown in the video. At this point, we remove the plastic cover and remove the cartridge, replacing it with the new original one; we insert the filter in the correct direction and finally reassemble the filter box!

Posted on 21 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in a BMW X1?
How to Replace the Battery in a BMW X1?
BMW X1 (2015-2022 / F48) To replace the battery in a BMW X1, open the hood to access the engine compartment. The battery is located on the right side, next to the engine and …
Where is the battery located in the BMW X1?
Where is the battery located in the BMW X1?
BMW X1 (2015-2022 / F48) In this video, you can see where the battery is located in the BMW X1 F48 and how to proceed if you need to replace it. As shown, it is positioned in…
How to Replace the Battery in a BMW X1
How to Replace the Battery in a BMW X1
BMW X1 (2015-2022 / F48) Before starting, open the front hood of your BMW X1. Begin by unscrewing and removing the screws that secure the air filter cover, then remove the co…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos