Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the cabin air filter of the BMW X1

Model: BMW X1 F48 - Years 2015-2022
Part: Cabin air filter

Today we will see how to remove and replace the cabin air filter of the BMW X1. First, open the front passenger door and start removing the plastic cover found at the bottom left, under the glove compartment; to do this, simply unscrew the screws found on the sides. At this point, remove the old pollen filter, replacing it with the new original one; insert it in the correct direction (usually indicated with arrows) and reattach the plastic cover with the screws, completing the replacement operation!

Posted on 15 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the cabin air filter of the BMW X1
Replacement of the cabin air filter of the BMW X1
BMW X1 (2009-2015 / E84) Briefly, we will see the instructions that will allow us to disassemble and replace the air filter of the BMW X1 cabin, in simple and quick steps. Fi…
Replacing Cabin Air Filter on BMW X1
Replacing Cabin Air Filter on BMW X1
BMW X1 (2009-2015 / E84) To replace the cabin air filter, you need to access it from outside the cabin, so first, lift the hood. Unscrew the six 8 mm (or 5/16 inch) bolts tha…
How to replace the cabin filter of the 2017 BMW X1
How to replace the cabin filter of the 2017 BMW X1
BMW X1 (2015-2022 / F48) Replacing the cabin air filter located inside your 2017 BMW X1 is a very simple operation, but at the same time it requires attention. Below we will …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos