Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter in the 2017 BMW X1

Model: BMW X1 F48 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Cabin air filter

See other generations:
Video tutorial

Replacing the cabin air filter located inside your 2017 BMW X1 is a very simple operation, but it requires attention. Below, you will find the steps to safely and correctly complete the replacement.

First, go to the driver's side and remove the plastic cover located at the lower left of the dashboard. Finally, locate the existing air filter and remove it. Replace it with a new compatible filter and reattach the previously removed plastic cover.


Updated on 17 September 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter in the BMW X1
Replacing the Cabin Air Filter in the BMW X1
BMW X1 (2009-2015 / E84) Follow these simple steps to remove and replace the cabin air filter in the BMW X1. First, open the hood of the vehicle and start unscrewing the moun…
How to Replace the Cabin Air Filter in a 2020 BMW X1
How to Replace the Cabin Air Filter in a 2020 BMW X1
BMW X1 (2015-2022 / F48) To successfully and independently complete the replacement of the cabin air filter in your 2020 BMW X1, follow this procedure. First, enter the vehic…
How to replace the cabin filter of the BMW X1
How to replace the cabin filter of the BMW X1
BMW X1 (2015-2022 / F48) The steps to replace the cabin air filter of the BMW X1 model f48 are as follows: The first step is to remove the lower part of the passenger side gl…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos