Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dashboard Removal Instructions for BMW X1

Model: BMW X1 E84 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Dashboard

See other generations:
Video tutorial

In this video tutorial, you will see the instructions for removing the dashboard of a first-generation BMW X1. First, disconnect the battery terminals located under the cargo area floor. Then, get inside the car and use a very thin plastic pry tool to remove the center dashboard panel.

Next, remove the plastic trim of the instrument cluster and disconnect the electrical connectors located at the back. After that, remove the shift boot and the plastic around the gear selector.

Follow the video all the way to the end!


Updated on 1 May 2026 by ScegliAuto


Related tutorials

How to Remove the Dashboard of the BMW X1
How to Remove the Dashboard of the BMW X1
BMW X1 (2009-2015 / E84) In this guide, you will find instructions to remove the entire dashboard of the BMW X1. First, get inside the cabin and start by removing the center …
How to Replace the Headlight Bulb on a BMW X1
How to Replace the Headlight Bulb on a BMW X1
BMW X1 (2009-2015 / E84) Today's instructions will show you how to remove and replace the low beam headlight bulb on a BMW X1. To access the headlight bulb, you need to remov…
How to Remove the Ignition Button on a BMW X1
How to Remove the Ignition Button on a BMW X1
BMW X1 (2009-2015 / E84) How to remove the ignition button on a BMW X1? Let's carefully see in this video how to proceed with the correct disassembly. The button to remove is…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos