Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to restore the brake light service on a BMW X1 Series F48

Model: BMW X1 F48 - Years 2015-2022
Part: Instrument cluster

In this video we can see how to reset the brake service light on a BMW X1 Series F48 version; we turn on the instrument panel and press the button located at the end of the side turn signal lever, on the left side of the steering wheel, which is used to scroll through the menu on the display. Let's scroll it until it reaches the mileage and then, by pressing the button located on the left side of the panel, just below the fuel reserve indication, and holding it down it will show us a reset message. Release it and then press it again to confirm: we will see a "reset in progress" message and then the message that the reset was successful.

Posted on 13 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the BMW X1 F48
How to Reset the Service Light on the BMW X1 F48
BMW X1 (2015-2022 / F48) This video tutorial shows how to reset the service light on the BMW X1 F48 produced from 2015 to 2022. This procedure can help if the service light r…
How to Reset the Service Light on a BMW X1 F48
How to Reset the Service Light on a BMW X1 F48
BMW X1 (2015-2022 / F48) Reset the service light on the BMW X1 F48 without tools. Turn on the ignition (without pressing the brake to avoid starting the engine). Press and ho…
Where to Find the OBD Port on the 2019 BMW X1 F48
Where to Find the OBD Port on the 2019 BMW X1 F48
BMW X1 (2015-2022 / F48) This guide will help you easily locate the OBD port on your BMW X1 F48. First, open the driver's side door and enter the cabin, ensuring the car is c…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos