Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin filter of the BMW X1

Model: BMW X1 F48 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Cabin air filter

See other generations:
Video tutorial

The steps to replace the cabin air filter of the BMW X1 model f48 are as follows: The first step is to remove the lower part of the passenger side glove compartment, using a 20mm Torx key. The second step is to remove the lower part and disconnect the connector.

The third step is to remove the side part and cover of the filter and remove it. The fourth step is to insert the new filter and close the cover, then proceed to reassemble the lower part of the glove compartment.


Posted on 1 March 2025 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter in the BMW X1
Replacing the Cabin Air Filter in the BMW X1
BMW X1 (2009-2015 / E84) Follow these simple steps to remove and replace the cabin air filter in the BMW X1. First, open the hood of the vehicle and start unscrewing the moun…
How to Replace the Cabin Air Filter in a 2020 BMW X1
How to Replace the Cabin Air Filter in a 2020 BMW X1
BMW X1 (2015-2022 / F48) To successfully and independently complete the replacement of the cabin air filter in your 2020 BMW X1, follow this procedure. First, enter the vehic…
How to Replace the Cabin Air Filter in the BMW X1
How to Replace the Cabin Air Filter in the BMW X1
BMW X1 (2009-2015 / E84) In today's video, see how to replace the cabin air filter in the first generation BMW X1. You can purchase the replacement for a few dollars from maj…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos