Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter in the BMW X1

Model: BMW X1 E84 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Cabin air filter

See other generations:
Video tutorial

In today's video, see how to replace the cabin air filter in the first generation BMW X1. You can purchase the replacement for a few dollars from major auto parts websites or local specialty stores. Once you have the part, you can proceed with the job. First, open the passenger side door, then locate the access cover under the footwell.

After that, remove it from the compartment and extract the old unit. Clean the installation area, then insert the new unit, and finish the job by reassembling everything as it was.


Updated on 7 September 2026 by ScegliAuto


Related tutorials

Replacing Cabin Air Filter on BMW X1
Replacing Cabin Air Filter on BMW X1
BMW X1 (2009-2015 / E84) To replace the cabin air filter, you need to access it from outside the cabin, so first, lift the hood. Unscrew the six 8 mm (or 5/16 inch) bolts tha…
Where is the cabin filter located in the BMW X1 and how to replace it?
Where is the cabin filter located in the BMW X1 and how to replace it?
BMW X1 (2015-2022 / F48) In this video, you can see where the cabin filter is located in the BMW X1 and how to replace it, a very simple and quick operation. As shown, it is …
How to Replace the Cabin Filter on a BMW X1
How to Replace the Cabin Filter on a BMW X1
BMW X1 (2015-2022 / F48) In this video tutorial, you can see how to replace the cabin filter on a BMW X1. First, ensure the engine is off and engage the parking brake. The ca…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos