Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter on a BMW X1

Model: BMW X1 F48 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Cabin air filter

See other generations:
Video tutorial

In this video tutorial, you can see how to replace the cabin filter on a BMW X1. First, ensure the engine is off and engage the parking brake. The cabin filter is located under the passenger side dashboard.

Now that you know where it is, start removing the covers to access it. Unscrew the retaining screws of the cover located at the bottom of the dashboard, then remove it from its housing. Next, disconnect the various electrical connectors from above the cover.

Once the screw is removed, you can take off the protective cover. Clean the filter container thoroughly from any impurities and place the new filter inside the container.


Updated on 12 May 2026 by ScegliAuto


Related tutorials

Replacing Cabin Air Filter on BMW X1
Replacing Cabin Air Filter on BMW X1
BMW X1 (2009-2015 / E84) To replace the cabin air filter, you need to access it from outside the cabin, so first, lift the hood. Unscrew the six 8 mm (or 5/16 inch) bolts tha…
How do you replace the cabin filter in the BMW X1?
How do you replace the cabin filter in the BMW X1?
BMW X1 (2015-2022 / F48) To replace the cabin filter of the BMW X1, you will need to loosen the screws that secure the panel located at the bottom of the glove compartment on…
How to replace the cabin filter of the BMW X1
How to replace the cabin filter of the BMW X1
BMW X1 (2015-2022 / F48) The steps to replace the cabin air filter of the BMW X1 model f48 are as follows: The first step is to remove the lower part of the passenger side gl…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos