Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the electric parking brake button of the BMW X3

Model: BMW X3 MK 2, F25 - Years 2010-2017
Part: Parking brake

The instructions provided in this guide will explain the process of disassembling and replacing the electric parking brake button of the BMW X3. First, we get on board the vehicle and start levering on the side of the button, being careful not to damage the cover of the central tunnel; once the button is removed, we will proceed to install the new original one, as shown in the video. At this point, we verify the correct operation of the electric parking brake button by checking the engagement and disengagement of the parking brake.

Posted on 27 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a BMW X3
How to Replace the Headlight Bulb on a BMW X3
BMW X3 (2017-2024 / MK 3, G01) Before you start, open the hood of your BMW X3. First, unscrew and remove the rear cover of the burnt-out bulb. Next, disengage the burnt-out bulb an…
Replacement of the rear headlight bulbs of the BMW X3
Replacement of the rear headlight bulbs of the BMW X3
BMW X3 (2010-2017 / MK 2, F25) Today's instructions will allow us to disassemble and replace the bulbs of the rear headlight of the BMW X3. First, we open the rear hatch of the tru…
How to Replace the Radio in a BMW X3
How to Replace the Radio in a BMW X3
BMW X3 (2003-2010 / MK 1, E83) Before you can start, sit in the driver's seat of your BMW X3. First, dislodge and remove the center air vents, then take out the buttons and disconn…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos