Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the BMW X3

Model: BMW X3 MK 2, F25 - Years 2010-2017
Part: Battery

Today's procedure will show us how to disassemble and replace the battery of the BMW X3, following the instructions below. First, we open the rear hatch of the trunk and begin removing the shelf and plastic cover, accessing the battery. Now, we disconnect both battery terminals (positive and negative), as shown in the video. At this point, we remove and replace the battery with the new one, of the correct type and with the same amperage; we make the electrical connection and reassemble the trunk floor cover!

Posted on 22 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the BMW X5 remote control?
How to replace the battery of the BMW X5 remote control?
BMW X3 (2010-2017 / MK 2, F25) In this tutorial we can see how to replace the battery of the BMW X5 remote control, a very simple and quick operation. To do this we will need a rep…
How to replace the battery of the BMW X3 remote control?
How to replace the battery of the BMW X3 remote control?
BMW X3 (2010-2017 / MK 2, F25) .. In this tutorial, we can see how to replace the battery of the BMW X3 remote control, an extremely simple and quick operation. To.. …
How to Replace the Key Fob Battery for the BMW X3
How to Replace the Key Fob Battery for the BMW X3
BMW X3 (2017-2024 / MK 3, G01) The following steps will show you how to disassemble and replace the battery of the key fob for the BMW X3. First, take your key fob and remove the p…

    Frequently Asked Questions

    • X3 2003-2010 - Where is the battery of the BMW X3? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos