Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to start a BMW X3 F25 with a flat battery

Model: BMW X3 MK 2, F25 - Years 2010-2017
Part: Battery

How can you restart a BMW X3 F25 with a flat battery? We know that this type of vehicle has the battery in the rear trunk, under the loading floor, but if we need to restart it, we have the contacts in the engine compartment. If the battery is completely flat, the remote control will not work either, so it will be necessary to enter the passenger compartment with the emergency key to open the engine compartment. The emergency contacts are located on the left side of the engine, at the shock absorber strut: the positive pole is highlighted by a conspicuous red cover, while on the outside of the strut itself, we will find a large bolt, which is the negative pole.

Posted on 13 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in a BMW X3 F25
How to Replace the Battery in a BMW X3 F25
BMW X3 (2010-2017 / MK 2, F25) In this video, see how to replace the battery in a BMW X3 F25. In this vehicle, the battery is located in the rear trunk, under a specific section, s…
How to Replace the Battery on a 2015 BMW X3 (F25)
How to Replace the Battery on a 2015 BMW X3 (F25)
BMW X3 (2010-2017 / MK 2, F25) In today's video, you will see how to remove and replace the battery on a 2015 BMW X3 F25, following the instructions below. First, locate the batter…
Replacing the Remote Key Battery on the BMW X3 F25 - X5 - X6
Replacing the Remote Key Battery on the BMW X3 F25 - X5 - X6
BMW X3 (2010-2017 / MK 2, F25) Let's discover in this short and simple guide how to disassemble and replace the battery of the remote key on the BMW X3 F25, as well as on the X5 an…

Other guides you may be interested in

    Frequently Asked Questions

    • X3 2003-2010 - Where is the battery of the BMW X3? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos