Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Trunk Button on BMW X3

Model: BMW X3 MK 2, F25 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Push button

See other generations:
Video tutorial

The same method should work on other BMW vehicles produced in the same years. Since the button is not working, open the trunk using the key, then remove the cover of the button by prying around the gap with a plastic wedge or a flathead screwdriver.

Once you have pulled the button out of its housing, disconnect the connector and you're done. Install the new button by connecting it to the connector and push it back into place; there are no screws, it simply snaps in. Very easy, right? This is a very simple and quick operation.


Updated on 17 April 2026 by ScegliAuto


Related tutorials

BMW X3 (2010-2017 / MK 2, F25) In this short and simple guide, you will learn how to remove and replace the trunk release button on the BMW X3. First, move to the rear of the vehic…
BMW X3 (2010-2017 / MK 2, F25) The instructions provided in this guide will explain the process of disassembling and replacing the electric parking brake button of the BMW X3. Firs…
BMW X3 (2010-2017 / MK 2, F25) In this tutorial, you will see how to manually unlock the tailgate on a BMW X3. This is a simple and quick operation to perform, for example, in case…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos