Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the cabin filter located in the BMW X1 and how to replace it?

Model: BMW X1 F48 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Cabin air filter

See other generations:
Video tutorial

In this video, you can see where the cabin filter is located in the BMW X1 and how to replace it, a very simple and quick operation. As shown, it is positioned inside the cabin, at the right junction between the dashboard and the center console.

If you need to replace it, go under the dashboard, remove the single screw from the side panel, and take it off. Next, locate the long rectangular door, open it by unlocking the corresponding clip, and pull out the old filter. Finally, insert the replacement in the correct orientation and reassemble everything by following the reverse procedure.


Updated on 27 July 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter on a BMW X1
How to Replace the Cabin Filter on a BMW X1
BMW X1 (2015-2022 / F48) In this video tutorial, you can see how to replace the cabin filter on a BMW X1. First, ensure the engine is off and engage the parking brake. The ca…
Where is the battery located in the BMW X1?
Where is the battery located in the BMW X1?
BMW X1 (2015-2022 / F48) In this video, you can see where the battery is located in the BMW X1 F48 and how to proceed if you need to replace it. As shown, it is positioned in…
Where is the USB port located in the BMW X1?
Where is the USB port located in the BMW X1?
BMW X1 (2015-2022 / F48) In this short video, you can see where the USB port is located in the BMW X1 F48, an essential element if you need to update the system, the maps, or…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos