Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to repair the storage compartment drawer of the BMW X3 F25

Model: BMW X3 MK 2, F25 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Glove compartment

See other generations:
Video tutorial

In this video, we will see how to repair the glove compartment of the BMW X3 F25. The issue of the compartment's lining peeling off is a common problem among many models of this type. We start by removing the three torx screws located at the bottom of the compartment.

After removing these, there are two more screws inside, one on each side. There are also other screws around the compartment that need to be removed in order to slide the compartment out of its housing.

Then, we need to disconnect the power cable for the courtesy light and the USB port. Once on the workbench, we need to remove the hinges and the swivel arm to separate the part to be glued, which is the front panel, from the actual compartment.

For gluing, it is recommended to use Bostik or a strong adhesive, and most importantly, to hold it in a clamp with heavy boards for a sufficient amount of time to straighten it out.


Posted on 13 July 2025 by ScegliAuto


Related tutorials

Where is the fuse box of the BMW X3 F25 located?
Where is the fuse box of the BMW X3 F25 located?
BMW X3 (2010-2017 / MK 2, F25) Locating the box containing all the fuses of your BMW X3 F25 is really simple. All you have to do is read the following guide and follow step by step…
How to Access the Fuse Box in the Cabin of the BMW X3 F25?
How to Access the Fuse Box in the Cabin of the BMW X3 F25?
BMW X3 (2010-2017 / MK 2, F25) In the BMW X3 F25, one of the fuse boxes is located behind the glove compartment. To access it, you need to remove the glove compartment. All you nee…
Location and Diagram of the BMW X3 F25 Fuse Boxes
Location and Diagram of the BMW X3 F25 Fuse Boxes
BMW X3 (2010-2017 / MK 2, F25) Inside the cabin of the BMW X3 F25, you will find the fuse box behind the glove compartment (for left-hand drive vehicles). Open the drawer and remov…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos