Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Location and Diagram of the BMW X3 F25 Fuse Boxes

Model: BMW X3 MK 2, F25 - Years 2010-2017
Part: Fuse box

Inside the cabin of the BMW X3 F25, you will find the fuse box behind the glove compartment (for left-hand drive vehicles). Open the drawer and remove the plastic cover located at the bottom, after which you will have access to the fuses. A second fuse box is located in the trunk of the vehicle, above the left wheel well. Here, you will find a handle to pull down, which provides access to the main box. A power module, primarily containing electrical relays, is located in the engine compartment on the left side, in front of the driver (again, left-hand drive).

Posted on 10 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Where can the visible fuse box of the BMW X3 model F 25 be found?
Where can the visible fuse box of the BMW X3 model F 25 be found?
BMW X3 (2010-2017 / MK 2, F25) Today we will show you the location of the fuse boxes on a BMW X3, model F 25 produced from 2011 to 2017. Inside the BMW X3 there are two fuse boxes.…
Location and Diagram of Fuses for the BMW X3
Location and Diagram of Fuses for the BMW X3
BMW X3 (2010-2017 / MK 2, F25) In this guide, discover the location and diagram of the fuses for the BMW X3 by following the instructions below. First, get inside the vehicle and l…
BMW X3 fuse box
BMW X3 fuse box
BMW X3 (2010-2017 / MK 2, F25) In today's video, we can see everything related to the fuse boxes inside a BMW X3, second series model produced from 2010 to 2017. The video shows in…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos