Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the third brake light bulb of the Audi A4?

Model: Audi A4 B8 - Years 2007-2016
Part:

In order to replace the third brake light bulb of the Audi A4, you need to access the interior of the car to locate the internal covering of the third brake light fixture. Once this covering has been removed, you will be able to access the connector connected to the third brake light bulb. After disconnecting this covering and unplugging the connector, you will be able to remove the bulb and replace it with a new one. The new bulb can now be inserted into its housing, inserting the corresponding covering and verifying that everything works correctly.

Posted on 12 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Third Brake Light Bulb on an Audi A4
How to Replace the Third Brake Light Bulb on an Audi A4
Audi A4 (2007-2016 / B8) To replace the third brake light bulb on an Audi A4, access the interior of the rear window. Use a thin object to pry off the cover. Once this cover …
How to disassemble the third brake light of the Audi A4
How to disassemble the third brake light of the Audi A4
Audi A4 (2014-2024 / B9) Today's instructions will allow us to disassemble and replace the tail light or third brake light of the Audi A4, in simple and quick steps. First, w…
How to Remove the Brake Light on an Audi A4 B7
How to Remove the Brake Light on an Audi A4 B7
Audi A4 (2004-2008 / B7) To access the third brake light on the Audi A4 (B7), open the trunk. From the top of the open trunk, you can reach the access panel for the third bra…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos