Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the cabin filter of an Audi Q3

Model: Audi Q3 8U - Years 2011-2018
Part: Cabin air filter

Thanks to this very short video tutorial, we can see the entire step-by-step procedure for replacing the cabin air filter of an Audi Q3, first-generation model produced from 2011 to 2018. Let's start the replacement by removing the plastic panel located under the dashboard on the passenger side by unscrewing its two plastic fixing screws, then we remove the cover of the filter box by pushing it to the right as shown in the video. After that, we can remove the old filter and replace it with a new one following the reverse procedure.

Posted on 27 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cabin Air Filter on the Audi Q3 F3
Replacing the Cabin Air Filter on the Audi Q3 F3
Audi Q3 (2018-2025 / F3) This video shows that the presence of a filter in the air intake of the Audi Q3's climate control system ensures that clean air circulates in the sys…
How to replace the cabin air filter of the 2018 Audi Q3
How to replace the cabin air filter of the 2018 Audi Q3
Audi Q3 (2011-2018 / 8U) To correctly replace the cabin air filter in your first generation Audi Q3 (2018), you must first carefully read the following procedure and then app…
Replacing the Cabin Air Filter in the Audi Q3
Replacing the Cabin Air Filter in the Audi Q3
Audi Q3 (2011-2018 / 8U) Periodically, you need to replace the filter that prevents dirt and dust from entering the ventilation system of the Audi Q3. You will find the filte…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos