Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the storage compartment of the Audi A3 8V

Model: Audi A3 8V, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Glove compartment

See other generations:
This video is currently unavailable

In this article, we will see how to disassemble the storage compartment of the Audi A3 8V. For this operation, you will need an 8mm socket wrench. First, you need to remove the right side cover using the appropriate tool or a flathead screwdriver, being careful not to damage it. After removing the cover, you need to remove the fixing screws of the compartment, 2 located underneath the compartment, 4 inside the compartment, and 1 to the right of the compartment.

Once the fixing screws are removed, remove the storage compartment and disconnect the connectors of the MMI system and the airbag.


Posted on 3 August 2025 by ScegliAuto


Related tutorials

How to Remove the Glove Compartment of an Audi A3
How to Remove the Glove Compartment of an Audi A3
Audi A3 (2003-2013 / 8P, MK 2) Learn how to remove the glove compartment located in the cabin of an Audi A3. Open the glove compartment and pull the side plastic cover using a leve…
How to remove the glove compartment in the Audi A3?
Audi A3 (2020-2026 / MK 4, 8Y) In this tutorial, you can see how to remove the glove compartment in the Audi A3, a very simple and quick operation. To do this, you will need two of…
How to Remove the Glove Box of the Audi A3
How to Remove the Glove Box of the Audi A3
Audi A3 (1996-2003 / MK 1, 8L) Follow these main instructions to remove and replace the glove box of the Audi A3 in simple steps. First, get inside the vehicle on the front passeng…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos