Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Glove Box of the Audi A3

Model: Audi A3 MK 1, 8L - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Glove compartment

See other generations:
Video tutorial

Follow these main instructions to remove and replace the glove box of the Audi A3 in simple steps. First, get inside the vehicle on the front passenger side and start by removing the right side plastic cover of the dashboard; then open the glove box and unscrew the fastening screws located at the top and bottom, as shown in the video.

At this point, disconnect and remove the glove box by unplugging the electrical connector of the bulb; carry out the repair or replacement, then reassemble everything!


Updated on 16 September 2026 by ScegliAuto


Related tutorials

Audi A3 (2003-2013 / 8P, MK 2) Learn how to remove the glove compartment located in the cabin of an Audi A3. Open the glove compartment and pull the side plastic cover using a leve…
Audi A3 (2012-2019 / 8V, MK 3) How to remove the glove compartment drawer on an Audi A3? Here’s how to proceed: use a plastic lever to pop out the rivets on the cover located at th…
Audi A3 (2003-2013 / 8P, MK 2) Need to remove the air fan from an Audi A3? Remove the air fan from inside the dashboard. Open the front glove compartment, unscrew the securing scre…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos