Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the oil filter and engine oil of the Audi A3

Model: Audi A3 MK 2, 8P - Years 2003-2013
Part: Oil filter

Today we will explain how to replace the oil filter and engine oil of the Audi A3 mk2 model. Pull the front hood release lever and open the hood. Remove the oil tank cap and pour the pre-change fluid inside. Start the vehicle for 5 minutes and let the components cool down. Unscrew the oil pan nut and remove the engine oil inside. Close the oil pan nut with a wrench. Using a 12mm socket wrench, unscrew the filter nut and perform the replacement. Pour the engine oil into the tank.

Posted on 17 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Engine Oil of the Audi A3?
How to Replace the Engine Oil of the Audi A3?
Audi A3 (2012-2019 / 8V, MK 3) To replace the engine oil of the Audi A3, first loosen the drain plug located at the bottom of the engine bay: once this plug is loosened, all the us…
How to Replace the Engine Oil and Filter on an Audi A3
How to Replace the Engine Oil and Filter on an Audi A3
Audi A3 (2012-2019 / 8V, MK 3) How to proceed with the replacement: lift the car on a column lift, remove the engine protection panel and unscrew the oil sump bolt; allow the oil t…
How to perform maintenance service on the Audi A3
How to perform maintenance service on the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) The regular maintenance check is necessary to ensure the proper functioning of the engine over time; let's see how to replace the motor oil and oil f…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos