Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Engine Oil and Filter on an Audi A3

Model: Audi A3 8V, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019

See other generations:
Video tutorial

How to proceed with the replacement: lift the car on a column lift, remove the engine protection panel and unscrew the oil sump bolt; allow the oil to drain into a container (tighten the bolt at the end of draining). Lower the car, then open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard and lift the front bonnet, securing it. Using a socket wrench, unscrew the oil filter, remove it, and fit a new one, ensuring it is properly seated around the thread.

Top up with new oil.


Updated on 6 March 2026 by ScegliAuto


Related tutorials

Audi A3 (1996-2003 / MK 1, 8L) To replace the engine oil and filter on a first-generation Audi A3, bring the engine to operating temperature and then turn it off. Safely lift the v…
Audi A3 (2003-2013 / 8P, MK 2) Today we will explain how to replace the oil filter and engine oil of the Audi A3 mk2 model. Pull the front hood release lever and open the hood. Rem…
Audi A3 (2003-2013 / 8P, MK 2) Do you want to replace the engine oil in your Audi A3? Here’s how to change the oil along with the filter. Lift the car on a column lift or jack, the…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos