Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the throttle body of the Audi Q3 2.0 TDI

Model: Audi Q3 8U - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Throttle body

See other generations:
Video tutorial

The instructions in this guide will show us how to disassemble and replace the throttle body of the Audi Q3 2.0 TDI, in simple steps. First, we open the hood of the car and start removing the plastic engine cover; then we unscrew the fixing screws of the throttle body found at the bottom, disconnecting the electrical connector to remove it, as shown in the video.

At this point, we clean or replace the throttle body if damaged, replacing it with the new original one; we correctly reassemble the throttle body.


Posted on 13 September 2025 by ScegliAuto


Related tutorials

How to Replace the Air Filter on an Audi Q3 2.0 TDI
How to Replace the Air Filter on an Audi Q3 2.0 TDI
Audi Q3 (2011-2018 / 8U) In today's tutorial, you will learn how to remove and replace the engine air filter on an Audi Q3 2.0 TDI, following the instructions below. First, o…
Guide to Replacing the Timing Belt on the Audi Q3 2.0 TDI
Guide to Replacing the Timing Belt on the Audi Q3 2.0 TDI
Audi Q3 (2011-2018 / 8U) Below are the main instructions that will guide you on how to remove and replace the timing belt on the Audi Q3 2.0 TDI. First, open the hood and sta…
How to replace the air filter of the Audi Q3 2.0 TDI
How to replace the air filter of the Audi Q3 2.0 TDI
Audi Q3 (2011-2018 / 8U) In today's video we will see the instructions that will allow us to disassemble and replace the air filter of the Audi Q3 2.0 TDI engine. First, we o…

Other guides you may be interested in

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos