Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Tail Light on the Audi Q3

Model: Audi Q3 8U - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tail light

See other generations:
Video tutorial

In this guide, you will learn how to remove and replace the tail light on the Audi Q3. First, open the trunk lid and start by removing the plastic cover located on the trunk lid, behind the tail light; then, unscrew the plastic screws of the light, disconnecting the electrical connector for the lights to remove it from the outside, as shown in the video.

At this point, replace and install the new tail light, connecting the electrical wiring and checking its operation, securing it properly with the screws!


Updated on 1 November 2026 by ScegliAuto


Related tutorials

How to disassemble and replace the rear headlight of the Audi Q3
How to disassemble and replace the rear headlight of the Audi Q3
Audi Q3 (2011-2018 / 8U) Below we will see the instructions that will allow us to disassemble and replace the rear taillight of the Audi Q3, in simple steps. First, we open t…
How to Replace the Bulb of the Rear Bumper Light on an Audi Q3
How to Replace the Bulb of the Rear Bumper Light on an Audi Q3
Audi Q3 (2011-2018 / 8U) To replace the bulb of the rear bumper light on an Audi Q3, you need to remove the small plastic cover located on the bumper, directly under the ligh…
How to Replace the Taillight on an Audi Q3
How to Replace the Taillight on an Audi Q3
Audi Q3 (2011-2018 / 8U) Before you can start, open the trunk lid. You will notice that near the taillight, on the inside of the trunk lid, there are 2 covered holes. Start b…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos