Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Taillight on an Audi Q3

Model: Audi Q3 8U - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tail light

See other generations:
Video tutorial

Before you can start, open the trunk lid. You will notice that near the taillight, on the inside of the trunk lid, there are 2 covered holes. Start by removing the covers of the holes using a flat screwdriver.

Once done, unscrew the bolts underneath. To remove the third bolt, you will need to remove a cover secured by a clip.

Once the third bolt is removed, gently close the trunk lid. This will allow you to easily extract the taillight and disconnect the connector, completing the removal. To install the new taillight, simply follow the steps in reverse, and you will have successfully completed the replacement.


Updated on 20 April 2026 by ScegliAuto


Related tutorials

How to Replace the Bulb of the Rear Bumper Light on an Audi Q3
How to Replace the Bulb of the Rear Bumper Light on an Audi Q3
Audi Q3 (2011-2018 / 8U) To replace the bulb of the rear bumper light on an Audi Q3, you need to remove the small plastic cover located on the bumper, directly under the ligh…
How to disassemble and replace the rear headlight of the Audi Q3
How to disassemble and replace the rear headlight of the Audi Q3
Audi Q3 (2011-2018 / 8U) Below we will see the instructions that will allow us to disassemble and replace the rear taillight of the Audi Q3, in simple steps. First, we open t…
Removing the Tail Light on the Audi Q3
Removing the Tail Light on the Audi Q3
Audi Q3 (2011-2018 / 8U) In this guide, you will learn how to remove and replace the tail light on the Audi Q3. First, open the trunk lid and start by removing the plastic co…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos