Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble and replace the rear headlight of the Audi Q3

Model: Audi Q3 8U - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tail light

See other generations:
Video tutorial

Below we will see the instructions that will allow us to disassemble and replace the rear taillight of the Audi Q3, in simple steps. First, we open the rear tailgate of the trunk and start unscrewing the screws we find inside the holes, behind the taillight; we remove the plastic cover of the lining to unscrew the additional screws, then disconnecting the electrical connector from the outside, as shown in the video.

At this point, if necessary, we replace the stop light bulbs, or the entire rear taillight; then we reassemble the headlight and check the operation of the stop lights!


Posted on 28 March 2025 by ScegliAuto


Related tutorials

Removing the Tail Light on the Audi Q3
Removing the Tail Light on the Audi Q3
Audi Q3 (2011-2018 / 8U) In this guide, you will learn how to remove and replace the tail light on the Audi Q3. First, open the trunk lid and start by removing the plastic co…
How to Replace the Bulb of the Rear Bumper Light on an Audi Q3
How to Replace the Bulb of the Rear Bumper Light on an Audi Q3
Audi Q3 (2011-2018 / 8U) To replace the bulb of the rear bumper light on an Audi Q3, you need to remove the small plastic cover located on the bumper, directly under the ligh…
Removing Rear Headlight on Audi Q3
Removing Rear Headlight on Audi Q3
Audi Q3 (2011-2018 / 8U) In today's video tutorial, you will learn how to remove the rear headlight on an Audi Q3, in simple steps. First, open the trunk and use something th…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos