Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the water pump and timing belt in an AUDI Q5 2.0 TDI?

Model: Audi Q5 MK 1, 8R - Years 2008-2017
Part: Timing belt

Attention, replacing the water pump and timing belt on an Audi Q5 2.0 TDI is not something to be taken lightly, but if you have some experience with mechanical work, I'll give you an idea of what to do. Disconnect the battery and lift the car, then remove the wheel and dismantle the components that obstruct access such as the bumper and belt protection. You need to loosen the timing belt, to do this remove the various bolts that hold the pulley and cover in place. Then remove the water pump and replace it with the new one. Reassemble the belt making sure it is tight and aligned. Finally, reassemble everything and check for leaks. The operation requires patience, so don't rush, but if you don't feel comfortable doing it yourself, contact a trusted workshop.

Posted on 1 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How and When to Change the Timing Belt on the Audi Q5 2.0 TDI
How and When to Change the Timing Belt on the Audi Q5 2.0 TDI
Audi Q5 (2017-2025 / MK 2, 80A) Today's guide will show you how to remove and replace the timing belt on the Audi Q5 2.0 TDI. The manufacturer states that for this type of engine, t…
Guide to Removing the Timing Belt on the Audi Q5 2.0 TDI
Guide to Removing the Timing Belt on the Audi Q5 2.0 TDI
Audi Q5 (2008-2017 / MK 1, 8R) In this guide, you will see the steps and procedure to replace the timing belt on the Audi Q5 2.0 TDI. For this engine type, the timing belt replacem…
Replacing the Timing Belt on the Audi Q5 2.0 TDI
Replacing the Timing Belt on the Audi Q5 2.0 TDI
Audi Q5 (2017-2025 / MK 2, 80A) This guide outlines the main steps to remove and replace the timing belt on the Audi Q5 2.0 TDI. First, open the hood and start by removing the front…

Other guides you may be interested in

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos