Do it yourself
Frequently asked questions about cars and motorcycles

Guide to Removing the Timing Belt on the Audi Q5 2.0 TDI

Model: Audi Q5 MK 1, 8R - Years 2008-2017
Part: Timing belt

In this guide, you will see the steps and procedure to replace the timing belt on the Audi Q5 2.0 TDI. For this engine type, the timing belt replacement is scheduled after 112,000 miles or 6 years. First, open the hood and raise the vehicle, starting by removing the front wheels and the bumper (unscrewing all the mounting screws). Next, remove the serpentine belt and then the timing cover. At this point, take the necessary references to remove and replace the timing belt with the new one, following the video tutorial until the end!

Updated on 9 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Audi Q5 (2017-2025 / MK 2, 80A) Today's guide will show you how to remove and replace the timing belt on the Audi Q5 2.0 TDI. The manufacturer states that for this type of engine, t…
Audi Q5 (2017-2025 / MK 2, 80A) This guide outlines the main steps to remove and replace the timing belt on the Audi Q5 2.0 TDI. First, open the hood and start by removing the front…
Audi Q5 (2008-2017 / MK 1, 8R) Attention, replacing the water pump and timing belt on an Audi Q5 2.0 TDI is not something to be taken lightly, but if you have some experience with …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos