Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Timing Chain on the Audi Q5 2.0T

Model: Audi Q5 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Timing belt

Video tutorial

Today, you will learn how to remove and replace the timing chain on the Audi Q5 2.0T. First, open the hood of the vehicle and start by removing the front bumper, unscrewing all the mounting screws located at the top and on the wheel wells; then remove the radiator and the intercooler, as shown in the video.

At this point, remove the timing cover, taking the necessary references for the timing chain replacement; remove the chain tensioners and proceed with replacing the timing kit, following the video tutorial until the end!


Posted on 15 October 2026 by ScegliAuto


Related tutorials

How to Replace the Timing Chain on an Audi Q5
How to Replace the Timing Chain on an Audi Q5
Audi Q5 (2008-2017 / 8R, MK 1) To replace the timing chain on an Audi Q5, access the left side of the engine block where the chain is located. First, remove the plastic cover, then…
Guide to Replacing the Timing Chain on the Audi Q5 2.0 TFSI
Guide to Replacing the Timing Chain on the Audi Q5 2.0 TFSI
Audi Q5 (2008-2017 / 8R, MK 1) In today's tutorial video, you will see the main instructions for removing and replacing the timing chain on the first generation Audi Q5 with a 2.0 …
Guide to Removing the Timing Belt on the Audi Q5 2.0 TDI
Guide to Removing the Timing Belt on the Audi Q5 2.0 TDI
Audi Q5 (2008-2017 / 8R, MK 1) In this guide, you will see the steps and procedure to replace the timing belt on the Audi Q5 2.0 TDI. For this engine type, the timing belt replacem…

Other guides you may be interested in

How to reset the AdBlue warning light on the Renault Trafic?

If the AdBlue warning light on the Renault Trafic remains on even after refilling with the additive, it is possible that a programming error has occurred in the AdBlue management unit: this unit is located inside the engine compartment and must be removed and disconnected to perform a diagnosis. The unit must then be connected to the appropriate diagnostic tool so that all stored errors can be reset correctly; after the reset, reinstall the unit, ensuring everything functions correctly.

Watch the video!


by ScegliAuto

More videos