Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the front bumper of the Audi Q5

Model: Audi Q5 MK 1, 8R - Years 2008-2017
Part: Front bumper

Today we will see the instructions that will allow us to disassemble and replace the front bumper of the Audi Q5, in simple steps. First of all, we open the hood of the car and start unscrewing all the fixing screws we find on the top and bottom of the bumper; then we unscrew all the fixing screws we find on both sides of the front wheel arches, also removing all the plastic clips, as shown in the video. At this point, we gently detach the bumper on the sides until we remove it completely, then disconnect the electrical connectors; finally, we reassemble everything!

Posted on 25 January 2025 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the front headlight of the Audi Q5
Disassembly of the front headlight of the Audi Q5
Audi Q5 (2008-2017 / MK 1, 8R) The instructions provided in this guide will explain the process of disassembling and replacing the front headlight of the Audi Q5. First, we open th…
Removing the Rear Bumper of an Audi Q5
Removing the Rear Bumper of an Audi Q5
Audi Q5 (2017-2025 / MK 2, 80A) To remove the rear bumper of the vehicle, follow these steps: Remove the five screws located on the outer profile of each rear fender, being careful …
Removing the Front Bumper on the Audi Q5
Removing the Front Bumper on the Audi Q5
Audi Q5 (2017-2025 / MK 2, 80A) To remove the front bumper from the Audi Q5, secure the vehicle on a stable and safe surface or place it on a lift. First, open the hood of the engin…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos