Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. Q5
    4. : How do you replace the rear bumper on the Audi Q5?

Audi Q5 - Video tutorial

Model: Audi Q5 80A, MK 2 - Years 2017-2024
Part: Rear bumper
Operation: How do you replace the rear bumper on the Audi Q5?

In order to replace the rear bumper of the Audi Q5 it is necessary to detach the moldings located along the wheel arches of the rear wheels; then it will be possible to proceed by loosening the screws which fix the bumper to the rear part of the car. These screws will be located in the lower central part of the bumper and in its upper part, accessible by opening the tailgate. After these screws have been unscrewed, it will be possible to loosen the ones located inside the two wheel arches, completely removing the bumper and disconnecting the connectors located inside.


Posted on 25 December 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos