Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear bumper of the Audi Q5

Model: Audi Q5 MK 1, 8R - Years 2008-2017
Part: Rear bumper

To perform certain types of maintenance on vehicles, it is necessary to remove the rear bumper. In the case of the Audi Q5, to remove the rear bumper we must: - open the trunk; - remove the cover of the towing hook; - unscrew the internal screw of the hook; - remove the rear lights, disconnecting the respective connectors; - unscrew the screws on the fenders; - remove the decorative trim; - remove the internal side parts of the trunk to unscrew the screws; - remove the fuse box and the compressor box, located on opposite sides; - unscrew the lower screws of the bumper; - remove the bumper; Once removed, you can proceed with the maintenance.

Posted on 14 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Bumper of the Audi Q5?
How to Replace the Rear Bumper of the Audi Q5?
Audi Q5 (2017-2025 / MK 2, 80A) To replace the rear bumper of the Audi Q5, detach the trim pieces located along the wheel wells of the rear wheels; then proceed to loosen the screws…
Replacing the Rear Bumper Light Bulb on an Audi Q5
Replacing the Rear Bumper Light Bulb on an Audi Q5
Audi Q5 (2017-2025 / MK 2, 80A) In this brief guide, you will find instructions to remove and replace the light bulb of the rear bumper light on an Audi Q5. First, move to the back …
How to Remove the Rear Bumper of the Audi Q5?
How to Remove the Rear Bumper of the Audi Q5?
Audi Q5 (2008-2017 / MK 1, 8R) To replace the rear bumper of the Audi Q5, first remove the rear position light assemblies located at the top of the bumper. Once these lights are re…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos