Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. Q5
    4. : Rear bumper

Audi Q5 - Rear bumper

Audi Q5 (2017-2024 / 80A, MK 2)
How do you replace the rear bumper on the Audi Q5?
In order to replace the rear bumper of the Audi Q5 it is necessary to detach the moldings located along the wheel arches of the rear wheels; then it will be …read all…
Posted on 25 December 2022 by ScegliAuto
Audi Q5 (2008-2017 / MK 1, 8R)
How do you remove the rear bumper of the Audi Q5?
To be able to replace the rear bumper on the Audi Q5, you must first remove the taillights of the parking lights, which are located in the upper part of the …read all…
Posted on 3 May 2024 by ScegliAuto
Car stereo (1) Battery (8) Bodywork (1) Glove box (1) Key (16) Timing belt (9) -board computer (5) Checks and maintenance (26) Headlight (2) Tail light (6) Air filter (2) Cabin air filter (2) Diesel filter (2) Accessory Kit (1) Light bulb (1) Headlight bulb (4) Rear light bulb (2) Interior lights ceiling light bulb (1) Dashboard light (1) Handle (3) Mask (1) Gear oil (3) Engine oil (1) Door panel (4) Front bumper (1) Rear bumper (2) Brake pads (1) Tires (6) Fuel pump (1) Door (2) Instrument cluster (6) Radiator (2) Wheel (2) Fuse box (6) Seat (3) Lock (2) Outside rearview mirror (1) Interior rearview mirror (1) Central tunnel (1) Windshield washer nozzle (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos