Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. Q5
    4. : Handle

Audi Q5 - Handle

Audi Q5 (2008-2017 / MK 1, 8R)
How to remove the rear door handle in the Audi Q5?
In this tutorial, we can see how to disassemble the rear door handle in the Audi Q5, a very simple and quick operation. First of all, we open the door in which …read all…
Posted on 19 September 2023 by ScegliAuto
Audi Q5 (2017-2024 / 80A, MK 2)
How do you replace the outside door handle on Audi Q5?
In order to replace the external door handle of the Audi Q5, you need to go and open the door itself, removing the circular cover in its internal side part. …read all…
Posted on 8 May 2023 by ScegliAuto
Audi Q5 (2017-2024 / 80A, MK 2)
How to replace the exterior rear door handle on an Audi Q5
Before starting, we will have to open the rear door of our Audi Q5. So let's start by disengaging and removing the handle cover. After that, we will have to …read all…
Posted on 23 January 2024 by ScegliAuto
Car stereo (1) Battery (8) Bodywork (1) Glove box (1) Key (16) Timing belt (9) -board computer (5) Checks and maintenance (26) Headlight (2) Tail light (6) Air filter (2) Cabin air filter (2) Diesel filter (2) Accessory Kit (1) Light bulb (1) Headlight bulb (4) Rear light bulb (2) Interior lights ceiling light bulb (1) Dashboard light (1) Handle (3) Mask (1) Gear oil (3) Engine oil (1) Door panel (4) Front bumper (1) Rear bumper (2) Brake pads (1) Tires (6) Fuel pump (1) Door (2) Instrument cluster (6) Radiator (2) Wheel (2) Fuse box (6) Seat (3) Lock (2) Outside rearview mirror (1) Interior rearview mirror (1) Central tunnel (1) Windshield washer nozzle (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos