Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. Q5
    4. : Headlight

Audi Q5 - Headlight

Audi Q5 (2008-2017 / MK 1, 8R)
How to replace the front headlight bulb of the Audi Q5.
To replace the headlight bulb on an Audi Q5, open the engine compartment hood and secure it with the appropriate rod. Remove the six plastic clips securing the …read all…
Posted on 11 April 2023 by ScegliAuto
Audi Q5 (2008-2017 / MK 1, 8R)
How to change the headlight bulb of the audi Q5
In this video we will go to see the procedure to replace the headlight bulb of the Audi Q5. Usually, when there is some problem with the car's headlights, a …read all…
Posted on 28 July 2022 by ScegliAuto
Car stereo (1) Battery (8) Bodywork (1) Glove box (1) Key (16) Timing belt (9) -board computer (5) Checks and maintenance (26) Headlight (2) Tail light (6) Air filter (2) Cabin air filter (2) Diesel filter (2) Accessory Kit (1) Light bulb (1) Headlight bulb (4) Rear light bulb (2) Interior lights ceiling light bulb (1) Dashboard light (1) Handle (3) Mask (1) Gear oil (3) Engine oil (1) Door panel (4) Front bumper (1) Rear bumper (2) Brake pads (1) Tires (6) Fuel pump (1) Door (2) Instrument cluster (6) Radiator (2) Wheel (2) Fuse box (6) Seat (3) Lock (2) Outside rearview mirror (1) Interior rearview mirror (1) Central tunnel (1) Windshield washer nozzle (1) Interior blower (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos