Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Audi
    3. :
  3. Q5
    4. : Brake pads

Audi Q5 - Brake pads

Brake Pads Audi Q5 (2008-2017 / mk 1, 8 r)

Audi Q5 (2008-2017 / MK 1, 8R)
How to Replace the Front Brake Pads on an Audi Q5
In this guide, we will outline the steps to remove and replace the front brake pads on an Audi Q5 in simple steps. First, lift the vehicle and begin by …Read all…
Posted on 15 June 2026 by ScegliAuto
Audi Q5 (2008-2017 / MK 1, 8R)
Replacing Brake Pads on Audi Q5
Let's replace the rear brake pads on the Audi Q5. Remove the wheel before replacing the pads. Lift the vehicle using a hydraulic jack to the desired height, …Read all…
Posted on 30 April 2026 by ScegliAuto
Cigarette lighter (1) Airbag (1) Car stereo (1) Battery (10) Body (2) Glove compartment (1) Key (29) Timing belt (12) V-belt (1) Onboard computer (5) Checks and maintenance (21) Dashboard (1) Bearing (1) Rear bench seat (1) Headlight (6) Tail light (9) Fog lights (1) Air filter (4) Cabin air filter (3) Diesel fuel filter (3) A/C system (1) Accessory kit (1) Light bulb (3) Side marker bulb (2) Headlight bulb (6) Tail light bulb (4) Interior dome light bulb (1) Instrument panel light (1) Handle (3) Trim cover (1) Starter motor (1) Transmission fluid (3) Engine oil (2) Clock (7) Door trim panel (8) Front bumper (2) Rear bumper (3) Brake pads (2) Fuel pump (1) Car door (2) Instrument cluster (2) Radiator (2) Wheel (3) Fuse box (20) Seat (3) Door lock (2) Side mirror (4) Rearview mirror (2) AdBlue warning light (9) Warning light – error code (11) (36) Tire pressure warning light (2) Service warning light (34) Fuel cap (2) Center console tunnel (1) Windshield washer nozzle (1) Blower motor (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos