Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Brake Pads on Audi Q5

Model: Audi Q5 MK 1, 8R - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Brake pads

See other generations:
Video tutorial

Let's replace the rear brake pads on the Audi Q5. Remove the wheel before replacing the pads. Lift the vehicle using a hydraulic jack to the desired height, then remove the wheel (with a socket wrench or air drill) along with the respective bolts.

Unscrew the caliper locking bolt, then remove the caliper from the wheel hub. Take out the old pads from the caliper, then remove the caliper. Install the new pads in the caliper.

Tighten all bolts and reinstall the wheel. Test the vehicle after installing the pads.


Updated on 31 March 2026 by ScegliAuto


Related tutorials

How to reset the brake pad wear service light on the Audi Q5.
How to reset the brake pad wear service light on the Audi Q5.
Audi Q5 (2008-2017 / MK 1, 8R) In this guide, we will see the instructions that will allow us to reset the brake pad wear service light on the Audi Q5. First, we lift the vehicle a…
How to Replace the Front Brake Pads on an Audi Q5
How to Replace the Front Brake Pads on an Audi Q5
Audi Q5 (2008-2017 / MK 1, 8R) In this guide, we will outline the steps to remove and replace the front brake pads on an Audi Q5 in simple steps. First, lift the vehicle and begin …
Resetting the Brake Pad Wear Light on the Audi Q5
Resetting the Brake Pad Wear Light on the Audi Q5
Audi Q5 (2008-2017 / MK 1, 8R) In this brief and simple guide, learn how to reset the brake pad wear light on the Audi Q5 by following the instructions below. First, get inside the…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos